Skip to main content
Version: 1.9.0

Slice Preview

Slice#

Slice is the final step before your sliced file is generated.

Click Slice the button to enter the slice preview.

Sliced your models with the selected default profile in the Slicing Profile Panel. Applied to all your models inside the printable space on the platform.

Parameter Manager#

Edit and adjust the current print slice related parameters that need to be saved.

Detect Islands#

Check whether the current slice file has a floating layer that cannot be successfully printed.

Delete Island#

Delete the island layer in the file, you can choose to delete the current layer or all layers.

Network Sending#

note
  1. Your printer should have a USB drive plugged in to store received sliced files from your computer.
  2. Your printer and computer must under the same LAN.
  3. The transmission speed is limited by printer's network module, for most printers, it's around 500KBytes/s, therefore for large size files, Network Sending is not recommended.

Printers support network sending will have this Network Sending button, which can send your sliced data to your printer directly.

Save#

Save the slice file.

note

After slicing your model, click "Save", you can select a supported format for your printer from the dropdown menu, and then print.

Back#

Return to the previous interface.